Nokia C1-00 LCD Blank Display Ways Jumpers Problem Solution.

Nokia C100 lcd problem,white display problem,blank display and no light in lcd display of nokia C100 can be solve with a few steps that are given in this post bellow is the diagram of nokia C100 to solve lcd problem in it.

In diagram above you can see there are different color lines and these are identifying the path of lcd prints.lcd pins are counted in picture from left to right as 1,2…12 and these prints can be check with a multi meter if any of them is broken or any component is broken you can make jumper to the points that are shown in picture and a big round point shows here you can make jumper and these are test points for lcd display blank display problems.

As in lcd points numbers are shown same numbers are defined with parts so that you can easily find where you have to apply jumpers. . if any part is not at the same place and have broken due to water damage or something else then you can see some points can also be scratched. So scratch them slightly and make jumper at that point.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

to get new repairing cellphone diagrams and applications with email “Enter your email address for RSS:” at the right side at top and press “subscribe”
Disclaimer.We are not affiliate with cell phone companies like Nokia,Samsung,Sony Ericsson,Lg,Motorolo and some other etc Manufacturers / Vendors .All trademarks are the property of the respective trademark owners.we just provide diagrams for study and repairing purpose.these images are uploaded by website we will not be responsible for any loss or damage, including personal injury.for more detail read Terms and Conditions and Privacy and Policies at bottom.
Next Post »