Here is the solution for Samsung Galaxy Core 2 SM-G355H showing "camera feature not supported" when trying to use or operate the camera in the device.
There are many factors that become issue to create problems occurred when the device water damaged or accidentally dropped or soaked in water.
If I encountered this problem you may first check the firmware flash or refurbished, so if the problem persists
You can then proceed to solve hardware problems.
This solution below shows the IC module camera holding the camera to work. If this chip become defective it will not recognize the camera operation and the result to show the camera feature not supported on the screen.
Samsung SM-G355H Camera Feature not supported Repair Solution -Hardware
The above solution showed the location of the chip camera module which where it is being mounted on the PCB Nokia E63. You may first try to clean the camera connector or replace if the camera feature not supported problem continues to exist.
Samsung G355H camera Forms solutions, Camera Solution Jumper Ways Will not Work Problem.
Sign up here with your email
Disclaimer.We are not affiliate with cell phone companies like Nokia,Samsung,Sony Ericsson,Lg,Motorolo and some other etc Manufacturers / Vendors .All trademarks are the property of the respective trademark owners.we just provide diagrams for study and repairing purpose.these images are uploaded by website visitors.so we will not be responsible for any loss or damage, including personal injury.for more detail read Terms and Conditions and Privacy and Policies at bottom.