Nokia 222 Signal Network Problem Solution Jumpers

Nokia 222 Signal Network Problem Solution Jumpers Here bellow is the Samsung hardware repair solution I9070i no signal, In the case described above her that there is no network / signal on Nokia 222 caused by his excess stress on the point that produced RF ICs By VCO, in his Normal Voltage which released 0,5V By VCO range - 1.34V, measuring results generated at the measuring point which you can see in the picture with the top yellow box marking is 4V,
[caption id="attachment_23968" align="alignnone" width="344"] Nokia 222 Signal Network Problem Solution Jumpers[/caption]
it means the voltage that produced too large, causing damage to the signal Nokia 222. Process Improvement In his Nokia 222, Please do the replacement of the component in the given marking Yellow. 's only one 1 sample Causes and Many More causes damage Nokia 222 signal if the measurement result is the same as the picture above then please you to do the replacement the IC is given a yellow marking. thank you

• Tweet
• Share
• Share
• Share
• Share

Sign up here with your email

Disclaimer.We are not affiliate with cell phone companies like Nokia,Samsung,Sony Ericsson,Lg,Motorolo and some other etc Manufacturers / Vendors .All trademarks are the property of the respective trademark owners.we just provide diagrams for study and repairing purpose.these images are uploaded by website visitors.so we will not be responsible for any loss or damage, including personal injury.for more detail read Terms and Conditions and Privacy and Policies at bottom.