Evercoss AT7J Winner S2 Usb Charging Problem Solution Jumper Ways
Problem:-
Evercoss AT7J Winner S2 usb charge solution,
Evercoss AT7J Winner S2 usb not recognized not detected
[caption id="attachment_25635" align="alignnone" width="416"]
Evercoss AT7J Winner S2 Usb Charging Problem Solution Jumper Ways[/caption]Diagnostic: -
Plug the USB cable into the PC and phone jack, read the notifications on the screen phone recognized or not. Make sure you can save data to the memory card or not. Replace the USB data cable and try again.
Replace the usb charger and try it again can charge it or not.
Solution:-
If you are facing a load problem in Evercoss AT7J Winner S2 and have tested all the above steps to solve this problem in it. Dismantle the phone and look at the phone for water and carbon damage. Clean it with an electronic cleaner and apply heat with a heat gun to dry it.
Keep in mind the heat should not be over and much because it can harm your skin and damage the motherboard. So keep it in the normal stream and look at the parts carefully.
Follow all these paths and components as shown in the diagram above. All these pieces are given in different colors so you can discover the ways of jumper easily.
Evercoss AT7J Winner S2,Usb,Charging,Problem,Solution,Jumper,Ways
Evercoss AT7J Winner S2, usb not charging, Usb not recognized, charging not save, not charging
Sign up here with your email
Disclaimer.We are not affiliate with cell phone companies like Nokia,Samsung,Sony Ericsson,Lg,Motorolo and some other etc Manufacturers / Vendors .All trademarks are the property of the respective trademark owners.we just provide diagrams for study and repairing purpose.these images are uploaded by website visitors.so we will not be responsible for any loss or damage, including personal injury.for more detail read Terms and Conditions and Privacy and Policies at bottom.